A Homeowner’s Guide to Asphalt Pavement Installation

asphalt-pavement-installationEver since it’s development, asphalt has now become the choice material for driveways. Aside from being durable, flexible and easy to maintain and repair; it is also easy to install it over existing driveway surfaces. Although asphalt installation is not exactly a DIY task, homeowners can take part in preparing the site. Asphalt can be poured over a clean and intact existing surface or the site can be excavated to get an aggregate base. Ideally, when it comes to asphalt installation, the site is excavated to put an asphalt base before a top coat of asphalt is placed.

To prepare the site, it is wise to first layout the design of your driveway. If you have any, remove gates or fences that might interfere with the job. This also includes any kind of vegetation like grass, shrubs and other plants in the way. Excavate the site to the correct depth and compact the soil underneath. This is a crucial part of the job and requires a power equipment, something that your asphalt contractor should have. However, small-scale asphalt paving projects should do well with a compacter that you can rent for this specific job.

Before getting started, take a look at the weather first as it plays a crucial role in asphalt laying. An asphalt surface less than 1.5 inches thick will quickly cool and harden when installed at about 70 degrees. For layers 2 inches and above, the optimum temperature for installation is 40 degrees. Another important consideration is moisture. Ensure that the weather has been dry for at least 24 hours so that asphalt can be successfully laid down. Most of the time, it would not take long for an expert contractor to get the job done.

It is important that there is crucial attention to detail to guarantee a good quality job, just like in any kind of project. Once the asphalt has been laid down, the surface will have to be leveled and the edges trimmed. Finally, the whole surface is compacted which is accomplished by roller equipment. This is a very big piece of machinery that your contractor should have. However, if the job is relatively small, you can get by with renting a small roller.

Remember to let the asphalt dry and harden for at least 24 hours before using it. Regularly clean the pavement by sweeping it, and immediately cleaning stains with water and detergent. Every year, seal the asphalt to lengthen its lifespan. If you have any more questions or concerns about asphalt installation, call a reputable asphalt contractor in your area now.